HOME

 

QT-PY LED Die and QT-PY RGB LED Dice

Pix/Vids/Schematics

(click to enlarge)

Info

 

LED: v2.1 Prototype Demo

 

=============================

 

PCB: LED v2.1 Board (Top)

 

PCB: LED v2.1 Board (Bottom)

 

 

============================

 

RGB: Prototype Demo

 

 

PCB: RGB v3.0 Board (Top)

 

PCB: RGB v3.0 Board (Bottom)

PCB is out for manufacture.

 

 

 

Eagle CAD: LED v2.1 Schematic

 

 

Eagle CAD: LED v2.1 PCB Layout

 

 

Eagle CAD: LED v2.1 Bill of Materials

 

 

 

 

============================

 

Eagle CAD: RGB  v3.0 Schematic

 

Eagle CAD: RGB  v3.0 PCB Layout

 

Eagle CAD: RGB Bill of Materials

 

 

 

 

 

 

 

 

 

Description:

"Fidget" boards: one with traditional single-colour LEDs and the other with multi-colour Neopixel RGB LEDs. The single-colour LEDs version will fit in a small Hammond project box.

 

Features:

- Moderate current draw with both traditional 3mm LEDs and neopixel RGB LEDs

- LiPo battery can run either board when you're away from your PC's USB port

- 1000uF surge cap for RGB Neopixel LEDs and current limiting resistors for power and data signals

- 3v3/5v level shifter for data signal (RGB board)

- Amplified buzzer speaker

 

Details:

- Either 1 matrix of 9 regular LEDs (LED board) or two matrices of  9 Neopixel RGB LEDs (RGB board) are arranged in a 3x3 matrix. In the lower half of the left panel, the breadboard prototype is only showing 4 RGB LEDs

- Pressing the GO button causes the matrix to progress through predefined display patterns

- RGB Neopixels can have multiple uses including that of rolled dice

- On the RGB board, a jumper allows you to code for both RGB matrices independently or combined into a single large matrix

- Utilizes a powerful Adafruit QT-PY SAMD21 or QT-PY RP2040 microcontroller

- Many SMT discrete components were used where possible

- On-board 500mA LiPoly battery charger

- Mounting holes are provided if you wish to use a 3D-printed case or Hammond project box

 

Software:

- Libraries and Neopixel learning document

- Optional Fast LED library

 

Software for LED Board:

- Here are some blink routines I have written for the QT-PY LED board: QT-PY_3x3_LED_Array.ino. The code is in a state of flux as I update it regularly. You'll notice that each of the routine sets has its own folder within the Arduino IDE: Bands.ino, Beeps.ino, Blinks.ino, Wipes.ino.

 

Software for RGB Neopixel LED Board:

- Demo and games have yet to be designed

- Here are some RGB Neopixel LED test patterns I've written

 

Pix:

Forthcoming.

 

Updated 2022-06-17 @ 8am

 

HOME