HOME

 Electronics Projects

Breadboard Power Supply (BBPS)
Pix/Vids (click to enlarge) Schematics Info

Production PCB

 

Video: BBPS Operation

 

 

 

Eagle CAD: BoM (Bill of Materials)

Description:

Dual voltage power supply designed for breadboards.

The BBPS mounts on the breadboard's power rail; it does not waste tie-point real estate.

With the exception of the two voltage regulators, all discrete components are through-hole for easy soldering.

 

Features:

 - Fits onto most breadboards with 0.1" spacing on power rails

 - 3 common power input types

 - 5v or 3.3v DC output

 

Power Input: 3 types

 - 2.1mm DC barrel jack: Input 7v to 20vDC

 - screw terminal:  Input 7v to 20vDC

 - miniUSB: 5vDC

 

Power Output:

 - 5v or 3.3vDC, jumper selectable.

 - Output current limit is 1000mA regulated by NCP1117

5-Button Switch Module
Pix/Vids (click to enlarge) Schematics Info

Production PCB

 

Eagle CAD: BoM (Bill of Materials)

Description:

5-button switch module for use with a parent device's configuration menu, etc.

All discrete components are through-hole for easy soldering.

 

Features:

 - 5 momentary switches connected through 10k ohm pull-up resistors

 - Female (upper PCB) or male (lower PCB) headers are connected to '+', Left, Top, Center, Bottom, Right  and '-' switches marked "+LTCBR-"

Real Time Clock (RTC)
Pix/Vids (click to enlarge) Schematics Info
PCBs are being fabricated.   

Eagle CAD: BoM (Bill of Materials)

Description:

Real Time Clock using higher precision PCF8523.

 

Features:

 - 5-pin male header for connection to your breadboard.

 - JST PH 2-wire connector to a LiPo battery.

Updated 2021-Feb-09

 

Tags: Breadboard Power Supply

HOME